REVO

 

Next-generation gel paint remover, free of methylene chloride. Effectively removes paints, coatings, enamels, impregnating agents, and primers. Penetrates deeply into any substrate, removing even older, hard, and resistant layers.

< Back

CODE
150
151
152

FORMAT
1 Kg can
5 Kg canister
25 Kg canister

  • Quickly removes old layers of paint and glue.
  • Developed to remove all types of oil- and alkyd-based paints, emulsion paints, varnishes, and most two-component coatings.
  • Can be used on metal, mineral, and wooden surfaces.
  • Does not damage metal, mineral, or wooden substrates.
  • Contains no methylene chloride.
  • Industry and industrial maintenance
  • Construction and renovation
  • Automotive sector
  • Marine sector
  • DIY and home improvement
  • Mechanically remove as much loose coating as possible (e.g. by scraping).
  • Air, substrate, and material temperature must be between 0 and 30 °C, relative humidity below 85%.
  • Use a disposable brush, flat or round. Do not use synthetic brushes.
  • Apply a thick, even coat of REVO.
  • Leave for approx. 10 to 60 minutes, or until the paint blisters and curls. Times are indicative and depend on the nature and thickness of the coating.
  • Remove the lifted paint with a high-pressure water jet or a scraper.
  • If several layers of old paint must be removed, the operation may need to be repeated.
  • Keep in cool, well-ventilated areas, protected from direct sunlight.